2nd Safe is ONLY compatible with lower receiver sets that have removable trigger guards.
Must NOT be under the influence of any altering substances. This includes, but is not limited to: Alcohol, Illegal or Prescription Drugs, Drowsiness or Exhaustion. Must be of age to properly handle a weapon.
Ensure no ammunition is near the assembly area.
Ensure Primary Safety is on, if applicable.
Remove the Weapon Magazine.
Clear the weapon and ensure no remaining
ammunition is in the weapon. Have a second qualified individual review and confirm the weapon is clear prior to beginning installation.
1.) After two qualified individuals confirm the weapon is clear. Pull the charging handle to ensure trigger resets on clear weapon. Enable Primary Safety, if applicable.
2.) Requires Hammer and Punch. Punch out roll pin on the rear end of the trigger guard. Safely Store roll pin for future use. Proceed to release trigger guard.
3.) Open Trigger Guard. Insert Trigger Guard inside of 2nd Safe Product. Close Trigger Guard. Proceed to align 2nd Safe behind the trigger and ensure all roll pin holes align.
4.) Grab (2) 2nd Safe Issued screws and 2nd Safe issued roll pin. Tighten (1) screw on one end of roll pin. Completely Insert 2nd Safe roll pin through unit. Ensure roll pin aligns with trigger guard and 2nd Safe, simultaneously. Use 2nd Safe issued wrench and tighten (2nd) screw on other end of 2nd Safe.
5.) Prior to dry fire function test, have two qualified individuals confirm the weapon is clear and ensure no ammunition is in the weapon. Do NOT insert weapon magazine, and must NOT be under the influence of any altering substances.
6.) Perform dry fire function test to ensure proper installation. Proper Installation indicates 2nd Safe will disengage with a proper command grip. 2nd Safe will re-engage with the release of the command grip.
7.) To Uninstall 2nd Safe: Release screw on 2nd Safe using 2nd Safe issued wrench. Remove 2nd Safe issued roll pin.
Release Trigger Guard and remove 2nd Safe Product.